germafuel.blogg.se - Electric t post driver barbed wire fence

The stirrup wire is used for securing the line wires to intermediate post, which is mild steel conforming to BS 4102. Line wire is mild steel wire, which is conform to BS 4102. line wire is attached top and bottom of the chain link mesh to ensure the structure and increase strength. Then the barbed wire or razor barbed wire will be attached onto the top and bottom of the fence to resist intruders. The chain link mesh anti-intruder fence is made of zinc or class A zinc alloy coated wire conforming to BS EN 10223-6 or organic coated wire conforming to BS EN 10223-6.Ĭhain link mesh is commonly fastened onto the post, such as intermediate post and straining post. Specifications of anti-intruder welded wire mesh Item

Post type: intermediate post and straining post.

Mesh size: 50 mm × 50 mm or 75 mm× 25 mm.

Material: zinc coated wire or organic coated wire.

The barbed wire conform to BS EN 10223-6 standard. The tying wire is used for securing mesh to line wires, which conform to BS 4102 standard with a nominal 1.6 mm diameter.Īdditional, the barbed wires are installed top or both top and bottom of the welded wire mesh to prevent intruders from entering the area and improve the safety factor. Stirrup wire is used for securing line wires to intermediate post, which conform to BS 4102 standard with a 2.5 mm diameters.

The line wire is 3 mm diameters and conform to BS EN 10223-6 or BS 4102 standard. The bottom wire is close to the ground and the top wire is not more than 50 mm below the top horizontal of the mesh for 50 mm meshes and not more than 75 mm below the 75 mm horizontal meshes. There are four line wires evenly spaced on the welded wire mesh fence.

AIF-08: Double extension arm intermediate post of welded anti-intruder fence.